All Deals › Accessories
Deals on ham radio accessories — connectors, cables, adapters, mics, programming cables, and more.
24 deals in Accessories
Solid machined brass body with heavy silver plating and Teflon (PTFE) insulator. The gold standard for solder-on UHF coax connectors — fits RG-8, RG-213, and LMR-400. Comparable silver/teflon connectors go for $5–$7 each at most suppliers. Stock up.
Listed Sun, Mar 22, 1:00 AM CT — verify price before purchasing.
Industry-standard Motorola-style NMO magnetic mount with 3.5-inch base, 12 feet of RG-58A/U coax, and PL-259 connector. Compatible with all NMO-thread mobile antennas from Larsen, Diamond, Comet, and others. Rated 0–3000 MHz. HRO discount price — same mount sells for $55–$60 at competing retailers.
Listed Sun, Mar 22, 1:00 AM CT — verify price before purchasing.
No drivers, no USB cable headaches. Program your Baofeng UV-5R, Quansheng UV-K5, or dozens of other radios wirelessly via Bluetooth/WiFi using the app or PC. 2,855 reviews at 4.79/5 — the most-reviewed ham radio programming solution on the market. At $9.99 it's a no-brainer add-on.
Listed Sun, Mar 22, 1:00 AM CT — verify price before purchasing.
The standard DC connector in ham radio: 24 pairs of 30A Anderson Powerpoles, pre-sorted in a storage box. If you're doing any DC wiring for your radio, power supply, or battery, this is where you start. Compatible with Powerwerx, West Mountain Radio, and ARRL-standard configurations.
Listed Sat, Mar 21, 1:00 AM CT — verify price before purchasing.
The compact digital mode interface that makes any radio work with FT8, Winlink, JS8Call, APRS, and packet — no separate sound card or serial adapter needed. USB-C device that handles both audio and CAT control in one cable run. Works with virtually every popular HF transceiver (IC-7300, Yaesu FT-891, Xiegu G90, and more). The fastest-growing gateway into digital modes for newly licensed hams: plug in, download WSJT-X or Winlink Express, and you're running FT8 in under an hour. Note: radio-specific cable sold separately; a data-capable USB-C cable is also required. High community recommendation rate on r/amateurradio and in the POTA digital operator community.
Listed Sat, Mar 21, 1:00 AM CT — verify price before purchasing.
25 snap-on ferrite chokes in 5 cable diameters — tame RFI on audio cables, USB lines, power leads, and antenna feedlines. Reusable snap design, no tools needed.
Listed Sat, Mar 21, 1:00 AM CT — verify price before purchasing.
560-piece assortment of adhesive-lined dual-wall heat shrink tubing in 12 sizes from 3/64" to 3/4". Marine grade means it's waterproof when shrunk — ideal for weatherproofing coax connections, wire splices, and connector boots on outdoor antennas.
Listed Sat, Mar 21, 1:00 AM CT — verify price before purchasing.
Three rolls of 3M Super 33+ — the gold standard for coax wrapping, wire harnessing, and outdoor weatherproofing. UL-listed, rated -18°F to 221°F, 7 mil thick. Ham radio staple for wire antennas and feedline protection.
Listed Fri, Mar 20, 1:00 AM CT — verify price before purchasing.
OEM Baofeng 3800mAh Li-ion extended battery pack for UV-5R family radios — nearly doubles the stock 1800mAh capacity. Fits UV-5R, UV-5RTP, UV-5G, GT-5R, and UV-5R Pro. Great for long field day sessions and emergency comms.
Listed Fri, Mar 20, 1:00 AM CT — verify price before purchasing.
4-piece SMA↔BNC adapter set covering all gender combos — swap antennas between SDR dongles, scanners, and BNC-equipped handhelds without re-terminating cable. 50 Ohm to 3 GHz.
Listed Fri, Mar 20, 1:00 AM CT — verify price before purchasing.
Plug-and-play USB programming cable for Baofeng UV-5R, BF-F8HP, UV-82, GMRS-V2, and Kenwood 2-pin radios. FTDI chipset means no driver headaches — works with CHIRP out of the box. Essential for anyone programming multiple HTs.
Listed Fri, Mar 20, 1:00 AM CT — verify price before purchasing.
Five #31 ferrite mix sleeve beads on a 12-inch coax jumper — covers 1–300 MHz and rated 300W SSB. Drop it between your tuner and antenna to kill common-mode noise at the source. On instant rebate at GigaParts through March 31.
Listed Fri, Mar 20, 1:00 AM CT — verify price before purchasing.
Rotary coax stripper with dual adjustable blades — strips RG-58, RG-8X, RG-59, RG-6, LMR-200 in one pass. Spring-loaded jaws, no batteries. A must-have for any coax work.
Listed Fri, Mar 20, 1:00 AM CT — verify price before purchasing.
Connect your Baofeng, BTECH, or RTL-SDR (SMA) directly to any mobile or base antenna coax with a PL-259/SO-239 connector. Pure brass construction, gold-plated center pin, 50-ohm. Two adapters per pack — keep one in the shack and one in the go bag. 4.7/5 stars across 800+ reviews.
Listed Fri, Mar 20, 1:00 AM CT — verify price before purchasing.
Self-adjusting wire stripper that handles 10–22 AWG wire with no dial adjustments — just squeeze and it grips the right gauge automatically. Built-in wire cutter and crimper. Perfect for building power cables, antenna feedlines, and shack wiring projects.
Listed Fri, Mar 20, 1:00 AM CT — verify price before purchasing.
The GL-AR300M16 (Shadow) is the go-to router for AREDN (Amateur Radio Emergency Data Network) mesh deployments. Runs on Atheros QCA9531 — exactly the chipset AREDN firmware supports. Flash AREDN firmware and it becomes a licensed-band 2.4 GHz mesh node for EmComm or portable operations. Dual external antennas, USB-powered option, OpenWRT-based. Only the AR300M16 variant is AREDN-supported (not the older AR300M).
Listed Fri, Mar 20, 1:00 AM CT — verify price before purchasing.
Pocket-sized travel router popular in ham radio portable and field operations. At 58g and USB-powered, it lives in your go-bag. Use it to share a hotel ethernet or cellular hotspot across your field shack, create a private local network for your SDR + laptop + tablet, or run a VPN for secure remote access to your home station. Runs OpenWrt — hackable and capable. Note: this uses a MediaTek chipset (NOT Atheros), so it is not AREDN-compatible. For AREDN mesh nodes, see the GL-AR300M16.
Listed Fri, Mar 20, 1:00 AM CT — verify price before purchasing.
The Mudi V2 is a self-contained 4G LTE router with a built-in 7000mAh battery — ideal for ARES/RACES activations, SOTA portable ops, or any field deployment where cellular data is your backhaul. Insert a SIM card, power it on, and your whole team connects. Runs OpenWrt, supports WireGuard VPN, has a 2.4" OLED display for quick status. US version supports major US LTE bands (B2/B4/B5/B12/B17). Dual-band WiFi (2.4 + 5 GHz). Battery lasts ~8 hours active use.
Listed Fri, Mar 20, 1:00 AM CT — verify price before purchasing.
44 pull-out drawers for organizing connectors, adapters, ferrites, fuses, hardware, and small electronics components. Stackable and wall-mountable. A shack staple for keeping PL-259s, SMA adapters, PowerPoles, and random bits from disappearing into the junk box.
Listed Fri, Mar 20, 1:00 AM CT — verify price before purchasing.
The most popular HT antenna upgrade for Baofeng UV-5R, BF-F8HP, UV-82, BTECH, and compatible radios. 2.15 dBi gain on 144/430 MHz, VSWR under 1.5:1, max 10W. BTECH-authorized with authenticity seal to avoid counterfeits. Immediate improvement over the rubber duck that shipped with your HT.
Listed Fri, Mar 20, 1:00 AM CT — verify price before purchasing.
5-pack of PL-259 (UHF/SO-239) to SMA Female adapters — essential for connecting Baofeng and other SMA-equipped handhelds to standard coax. 50 Ohm, handles VHF/UHF. Note: gold-plating not confirmed on Amazon listing.
Listed Fri, Mar 20, 1:00 AM CT — verify price before purchasing.
Complete 15-piece soldering kit with 60W adjustable-temperature iron, solder wire, 2 tip styles, stand, desoldering pump, and sponge. Fast heat-up for connector work, coax assembly, and radio repair. Great starter kit or backup iron for the shack.
Listed Fri, Mar 20, 1:00 AM CT — verify price before purchasing.
Two-socket cigarette lighter splitter with real-time battery voltage readout — great for monitoring car or deep-cycle battery health during mobile ham operation. Dual USB ports for device charging. Fits any 12V/24V vehicle.
Listed Fri, Mar 20, 1:00 AM CT — verify price before purchasing.
Generic K-plug USB programming cable for Baofeng UV-5R, UV-82, BF-888S, and most Kenwood-compatible radios. Uses the CH340 chipset — install the free CH340 driver on Windows, then use CHIRP to read/write channels. Budget choice if you just need to program one radio. Note: FTDI cables (like the BTECH PC03) are more reliable on Mac/Linux.
Listed Mon, Mar 16, 4:00 PM CT — verify price before purchasing.